Corner computer desk with hutch – Most standard desks are definitely outdated and impractical. Many barely room for anything other than home computer. Corner desks solve this problem by giving twice the surface area while taking advantage of the room space, which is not normally used.
Cut one rectangle of plywood measuring 5 meters by 3 meters. Use sawhorses and hand power saw to cut this piece in half width wise use an angled line that line will stretch from two meters from the end on the left side up to three meters in from the same end on the right side, creating a 45 degree angle cuts . When facing one of these pieces on the head and press bevels pieces together, they will form a 90 degree angle to fit into the corner computer desk with hutch of a room. Cut six rectangles measuring 3 1/2 meters of 1 1/2 feet to the legs of the table. Make the short wooden strips to the desktop’s lip.
Collect desktop pieces on top of sawhorses using wood glue and wood biscuits. Cut six to eight seats in each end of the angled sides of the corner computer desk with hutch, spacing them evenly and identical, so they will line up, when brought together. Apply glue generously over the edge and into the openings. Put the biscuits in the holes on the one hand, before lining up the edges of the other side, pushing the biscuits in place with tabs in the slots. Press the edges together well and let the glue dry.Related :angled computer desk, corner computer desk and hutch